Semax Peptide: Structure, Design and the ACTH(4-10) Story
By The Bionova Club Team
Research use only. This product is supplied for laboratory research use only. It is not intended for human or veterinary use.
Disclosure: Bionova Club sells Semax as a research material, linked below.
Semax is a synthetic heptapeptide, Met-Glu-His-Phe-Pro-Gly-Pro (MEHFPGP). It keeps residues 4 to 7 of adrenocorticotropic hormone (ACTH) and replaces the rest of the ACTH(4-10) fragment with a Pro-Gly-Pro tail. Most of what makes Semax distinctive as a molecule comes from that swap.
This overview covers where the ACTH fragment came from, how Semax is built, what it breaks down into, where it has been reported to bind on rat brain membranes, and a less discussed chemistry topic: how it binds copper(II).
How this page differs from our comparison: this page covers Semax on its own, from its ACTH origin and design to its breakdown products, binding data and copper chemistry. It does not weigh Semax against Selank. For that side-by-side view, read our Semax vs Selank comparison.
Semax at a glance
- Sequence: H-Met-Glu-His-Phe-Pro-Gly-Pro-OH (MEHFPGP)
- Also written as: ACTH(4-7)-Pro-Gly-Pro
- Molecular formula: C37H51N9O10S (PubChem CID 9811102)
- Molecular weight: 813.9 g/mol
- CAS number: 80714-61-0
- Termini: free amine at the N-terminus and free acid at the C-terminus (not acetylated or amidated)
From ACTH to ACTH(4-10)
Alpha-melanocyte-stimulating hormone (α-MSH) is a 13-residue peptide derived from proopiomelanocortin (Brzoska et al., 2008). PubChem records its sequence as SYSMEHFRWGKPV, with an acetyl group on the N-terminus and an amide at the C-terminus (PubChem CID 16133793). That sequence is also the N-terminal segment of ACTH. Residues 4 to 10, Met-Glu-His-Phe-Arg-Trp-Gly (MEHFRWG), make up the ACTH(4-10) fragment.
By the late 1970s, ACTH(4-10) was being studied as a fragment in its own right in rat experiments. In one conditioned taste aversion study, ACTH(4-10) changed the behavioral measure without a matching change in the plasma corticosterone response (Smotherman and Levine, 1980). In that study, the behavioral result did not track the pituitary-adrenal response.
The same α-MSH sequence is also the source of KPV, its last three residues (Brzoska et al., 2008). Our KPV peptide overview covers that other branch of the family.
How Semax was designed
Semax is ACTH(4-7) joined to a Pro-Gly-Pro tripeptide: H-Met-Glu-His-Phe-Pro-Gly-Pro-OH (PubChem CID 9811102; Tabbì et al., 2015). Relative to ACTH(4-10), the C-terminal Arg-Trp-Gly is replaced by Pro-Gly-Pro.
Regulatory peptides have often been treated as short-lived in biological samples. Ashmarin and colleagues argued that this view needed revising for peptides that carry a Pro-Gly-Pro motif. They described such peptides, called glyprolines, as more stable than typical regulatory peptides (Ashmarin et al., 2005).
The sequence difference is worth keeping in view. Semax does not contain the full His-Phe-Arg-Trp stretch found in ACTH and α-MSH, so it should not be assumed to behave like those hormones. It is a hybrid sequence and needs to be studied as its own compound.
What Semax breaks down into
Dolotov et al. (2004) incubated tritium-labeled Semax with plasma membranes from rat forebrain basal nuclei and followed the fragments by HPLC. Under those conditions, its half-life was longer than one hour. The authors identified dipeptidyl aminopeptidases as the main enzymes involved, cleaving Semax first to the pentapeptide HFPGP and then to the tripeptide PGP.
Those two fragments have been studied directly. Vyunova et al. (2017) described HFPGP and PGP as the major metabolic products of Semax and reported that both have their own binding sites on plasma membranes of neurons. Of the fragments they tested, the five-residue peptides EHFPG and HFPGP competed most strongly for Semax binding sites. A binding experiment with Semax may therefore involve the intact peptide plus fragments that are studied in their own right.
Where Semax binds
No receptor for Semax has been identified in the papers cited here. Binding constants were first reported by Dolotov et al. (2004), who used tritium-labeled Semax on plasma membranes from the basal nuclei of the rat forebrain. Dolotov et al. (2006) later reported the same values on membranes from rat basal forebrain:
- Binding was time dependent, specific and reversible.
- Specific binding required calcium ions.
- The dissociation constant (KD) was about 2.4 nM.
- Maximum binding (Bmax) was about 33.5 fmol per mg of protein.
The 2006 paper also measured BDNF protein in rats and reported an increase in the basal forebrain, but not the cerebellum, three hours after Semax administration in that study. The authors presented the binding data as evidence of specific binding sites, not as identification of a known receptor.
Semax and copper: a chemistry angle
Semax has a free N-terminal amine and a histidine at position 3, which together make a site for binding metal ions. Tabbì et al. (2015) studied this in chemical assays and reported three copper(II) complex species. From pH 5 upward, the main complex had copper held by four nitrogen atoms in a planar arrangement. In an in vitro MTT assay, Semax reduced copper-induced cytotoxicity in SH-SY5Y neuroblastoma and RBE4 endothelial cell lines.
The same group then compared N-acetyl Semax (Magrì et al., 2016). Acetylating the N-terminus changed the copper complex from a CuN4 arrangement to a distorted CuN3O arrangement, with a weak contact from the methionine sulfur, and shifted its redox potential. Acetylated Semax did not reduce copper-induced toxicity in SH-SY5Y neuroblastoma cells. The authors pointed to the free amino group as the key difference.
This matters when you compare catalog listings or papers. "N-acetyl Semax" is a different molecule from Semax: it adds an acetyl group (C2H2O, about 42 g/mol) and behaves differently in metal-binding assays. The material we supply is unmodified Semax, H-MEHFPGP-OH.
Practical notes for the lab
A few properties of the sequence are worth knowing when you plan an assay or read a methods section:
- Metals. Semax forms copper(II) complexes in chemical studies, so the metal content of a buffer is a variable that can change results (Tabbì et al., 2015).
- Methionine at position 1. Met-containing peptides can oxidize, which appears as a +16 Da species in mass spectrometry.
- Fragments. Analytical methods for biological samples may need to account for HFPGP and PGP (Dolotov et al., 2004; Vyunova et al., 2017).
- Form. Confirm whether a paper used Semax, N-acetyl Semax or another analog before comparing data. Our introduction to peptides explains terminal modifications in more detail.
- Documentation. Store and handle the lyophilized material as stated on its label and batch documentation.
Reading the literature carefully
Many of the Semax papers cited here come from research groups in Moscow, and many papers in this field appear in Russian-language journals with only an English abstract. The copper coordination work cited above is an exception; it comes from a group in Catania. Independent replication is otherwise limited in the literature reviewed here. When you read a Semax paper, check the exact peptide form, the species, the tissue and whether breakdown products could account for the signal. Findings from animal or cell models should be read as such. This page makes no claims about effects in people, and none should be drawn from the animal and cell studies described here.
Key takeaways
- Semax is MEHFPGP: ACTH(4-7) joined to a Pro-Gly-Pro tail.
- It comes from the ACTH(4-10) fragment, MEHFRWG, which was studied on its own in rat experiments from the 1970s.
- With rat brain membranes, it is cleaved first to HFPGP and then to PGP.
- Specific binding sites in rat basal forebrain have a KD of about 2.4 nM, but no receptor has been identified in the papers cited here.
- Semax forms copper(II) complexes, and N-acetylation changes that chemistry.
Explore more research compounds in our peptide catalog.
Shop for your research: Semax 10 mg.
References
- Brzoska T, Luger TA, Maaser C, Abels C, Böhm M. Alpha-melanocyte-stimulating hormone and related tripeptides: biochemistry, antiinflammatory and protective effects in vitro and in vivo, and future perspectives for the treatment of immune-mediated inflammatory diseases. Endocr Rev. 2008. https://pubmed.ncbi.nlm.nih.gov/18612139/
- Smotherman WP, Levine S. ACTH4-10 affects behavior but not plasma corticosterone levels in a conditioned taste aversion situation. Peptides. 1980. https://pubmed.ncbi.nlm.nih.gov/6262738/
- Ashmarin IP, Samonina GE, Lyapina LA, et al. Natural and hybrid ("chimeric") stable regulatory glyproline peptides. Pathophysiology. 2005. https://pubmed.ncbi.nlm.nih.gov/15837162/
- Dolotov OV, Zolotarev YA, Dorokhova EM, et al. The binding of Semax, ACTH 4-10 heptapeptide, to plasma membranes of the rat forebrain basal nuclei and its biodegradation. Russ J Bioorg Chem. 2004;30:213-217 (English translation of Bioorg Khim 2004;30:241-246). https://pubmed.ncbi.nlm.nih.gov/15344653/
- Vyunova TV, Andreeva LA, Shevchenko KV, Myasoedov NF. Synacton and individual activity of synthetic and natural corticotropins. J Mol Recognit. 2017. https://pubmed.ncbi.nlm.nih.gov/27921334/
- Dolotov OV, Karpenko EA, Seredenina TS, et al. Semax, an analogue of adrenocorticotropin (4-10), binds specifically and increases levels of brain-derived neurotrophic factor protein in rat basal forebrain. J Neurochem. 2006. https://pubmed.ncbi.nlm.nih.gov/16635254/
- Tabbì G, Magrì A, Giuffrida A, et al. Semax, an ACTH4-10 peptide analog with high affinity for copper(II) ion and protective ability against metal induced cell toxicity. J Inorg Biochem. 2015. https://pubmed.ncbi.nlm.nih.gov/25310602/
- Magrì A, Tabbì G, Giuffrida A, et al. Influence of the N-terminus acetylation of Semax, a synthetic analog of ACTH(4-10), on copper(II) and zinc(II) coordination and biological properties. J Inorg Biochem. 2016. https://pubmed.ncbi.nlm.nih.gov/27586814/
- PubChem. Semax (ACTH (4-7), Pro-Gly-Pro-), CID 9811102. https://pubchem.ncbi.nlm.nih.gov/compound/9811102
- PubChem. Alpha-MSH, CID 16133793. https://pubchem.ncbi.nlm.nih.gov/compound/16133793
This product is supplied for laboratory research use only. It is not intended for human or veterinary use.
